930 Volumetric Infusion Pump, New with 18 Month Warranty. Priced with your qualifying trade-in IV Pump.
For continuous flow rate infusion of fluid drug and transfusion in ICU or CCU as well as infusion of anesthetic, anticancer agent or nutrient Flow Rate: 1-999 ml/h 0.1-99 ml/h at 0.1 ml/h increments 100-999 ml/h at 1.0 ml/h increments Total volume range: 1 - 9,999 ml Purge flow rate: 700 ml/h K.V.O. mode (Keep the Vein Open) Memory function stores most recent flow rate and total volume Audible and Visual Alarms User-selectable setup (IV Set, sound, occlusion) Display shows flow rate, infused volume and total volume 5”D x 7”W x 9”H, 7 lbs Includes Drop Sensor and Operator's Manual ISO and CE approved Rechargeable Battery is easily replaceable in your clinic, saving time and money 2-3 hours of operation on fully charged battery @ 25 ml/h

Engler ADS-1000 Anesthesia Delivery System, New

Accessories for Anesthesia Machines and Vaporizers: Turret Mount-Allows 2 vaporizers to be mounted in space for 1.To change, remove connectors & rotate to 2nd
For mounting 2 vaporizers on Bickford anesthesia machines. Vaporizers are mounted back to back on a rotating bracket. To change from one to the other, i.e. Sevoflurane to Isoflurane, disconnect inlet and outlet connectors, rotate isoflurane to face front, then reconnect

Table Top, with flowmeter (Specify), Back bar, Post, DISS Male Connection for O2 supply
For use on small animals in a non-breathing application. Flowmeter 0-5 L/M. back bar for a vaporizer. Mounting post for auxiliary apparatus and a D.I.S.S. male connection for a regulated oxygen supply, mounted on a 10" x 13" aluminum plate. Customer may substitute a 0-1 L/M flowmeter by specifying it with order. Vaporizer sold separately

Table Top same as 612020 without Bain
With Vapomatic™, Oxygen only, D.I.S.S. Inlet Connection, Oxygen Flowmeter, Deluxe Bain Block. Customer may substitute a 0-1 L/M flowmeter by specifying it with order. 61020B - same but w/o Bain Block

New Table Top with Vapomatic, O2 Flowmeter, O2 Flush Valve, CO2 Absorber, PCI Pop Off Valve, Pressure Manometer and DISS Male Connection
Equipped with Vapomatic™ Vaporizer, O2 flowmeter, Oxygen flush valve, CO2 absorber, PC-1 pop-off valve, pressure manometer and D.I.S.S. male connection.

Stand Model with One Oxygen Flowmeter, Absorber, One Gas (Oxygen) and One Yoke
The Model 51111 has all the unique features of the BICKFORD 51110 with an addition of one "E" cylinder yoke. This superb design allows the veterinarian to deliver anesthesia where a connection to a main O2system is not accessible or provides a backup source of O2 when connected to a main O2 system. Design Features: ” Quick release toggle latches for easy to change absorbent (prepack or loose granules). ” Pressure manometer ” Air intake valve ” Pop off valve (see through, easy to clean). ” Horizontal inhalation and exhalation valves to prevent valves from sticking in the open position. ” O2 flowmeter 0.2 L to 5 LPM. ” O2 flush ” Compact, very mobile ” Absorber pole allows absorber to adjust up or down and also swings out of the way when not in use. ” Stand provides excellent stability ” Quick & easy switch over from rebreathing to non rebreathing system. ALL STAND MODELS COME TO YOU: COMPLETELY ASSEMBLED - 5 YEAR WARRANTY* WITH 2 LITER BAG WITH 3 LITER BAG PEDIATRIC BREATHING CIRCUIT F/AIR KIT SCAVENGING SYSTEM *Note: 5 yr. warranty does not include rubber goods or plastic tubing. *Bickford Anesthesia Machines are warranted by A.M. Bickford, Inc. to be free from defects in parts or workmanship for a period of five years after delivery when used in normal service. Any Bickford Anesthesia Machine which proves defective in workmanship or parts will be repaired, replaced, or credited at the option of A.M. Bickford, Inc. during the warranty period at no cost provided the unit is returned to A.M. Bickford, Inc. and such defect if verified. A.M. Bickford, Inc. is not responsible for normal wear, damage from abuse, or misuse of the equipment or any obligation beyond repair or replacement of proven defects in the equipment.

Stand Model with Oxygen Flowmeter, Absorber, Two Yokes (Oxygen)
The BICKFORD Model 51112 is designed to give the veterinarian that added security of having 2 oxygen "E" cylinder yokes to hold two oxygen tanks. Each yoke has its own single stage regulator to assure proper supply pressure. All models provide DISS connections for external gas supplies. Design Features: ” Quick release toggle latches for easy to change absorbent (prepack or loose granules). ” Pressure manometer. ” Air intake valve. ” Pop off valve (see through, easy to clean). ” Horizontal inhalation and exhalation valves to prevent valves from sticking in the open position. ” O2 flowmeter 0.2 L to 5 LPM. ” O2 flush. ” Compact, very mobile. ” Absorber pole allows absorber to adjust up or down and also swings out of the way when not in use. ” Stand provides excellent stability. ” Quick & easy switch over from rebreathing to non rebreathing system. ALL STAND MODELS COME TO YOU: COMPLETELY ASSEMBLED - 5 YEAR WARRANTY* WITH 2 LITER BAG WITH 3 LITER BAG PEDIATRIC BREATHING CIRCUIT F/AIR KIT SCAVENGING SYSTEM *Note: 5 yr. warranty does not include rubber goods or plastic tubing *Bickford Anesthesia Machines are warranted by A.M. Bickford, Inc. to be free from defects in parts or workmanship for a period of five years after delivery when used in normal service. Any Bickford Anesthesia Machine which proves defective in workmanship or parts will be repaired, replaced, or credited at the option of A.M. Bickford, Inc. during the warranty period at no cost provided the unit is returned to A.M. Bickford, Inc. and such defect if verified. A.M. Bickford, Inc. is not responsible for normal wear, damage from abuse, or misuse of the equipment or any obligation beyond repair or replacement of proven defects in the equipment..

Stand Model with Two Oxygen Flowmeters (one high 0-5 LPM, one low 0-1 LPM), Absorber, One Gas (Oxygen ) and NO Yokes

Stand Model, Two Oxygen Flowmeters (one high 0-5 LPM, one low 0-1 LPM), One Absorber, One Gas (Oxygen) and One Yoke

Stand Model, Two Oxygen Flowmeters (one high 0-5 LPM, one low 0-1 LPM), One ABsorber, Two Yokes

Table Top, with Vapomatic, O2 only, D.I.S.S Inlet Connection for O2 Flowmeter, Deluxe Bain Block
With Vapomatic™, Oxygen only, D.I.S.S. Inlet Connection, Oxygen Flowmeter, Deluxe Bain Block. Customer may substitute a 0-1 L/M flowmeter by specifying it with order. 61020B - same but w/o Bain Block.

Oxygen & Nitrous Oxide Flowmeters, "Fail Safe" System, DISS conn. for ext. supplies, Oxygen Flush Valve, Absorber 2 "E" Cyl, Yokes, Regulators & Pressure Gauges

Wall Mount, 02 Flowmeter, CO2 Absorber, O2 Flush Valve
Table plate 13" × 61⁄2", vaporizer mount, 0-5 L/min. flowmeter for oxygen, oxygen flush valve, Supersorber™ CO2 absorber can be raised or lowered to suit, folds against wall when not in use. Vaporizer sold separately.

APM- Audio Patient Monitor (includes batteries, sensor, chest piece cup and set of 3 Esophageal Stethoscope Tubes)
The APM audio patient monitor is a compact, portable, battery powered, solid state electronic audio amplifier having special characteristics for sensing the low frequency pressure pulses of the cardiovascular system and the sounds of respiration. Heart/pulse and/or respiration sounds are picked up by a sensor unit from an esophageal stethoscope tube or chest piece cup, amplified and presented audibly from a speaker and visually by a flashing red indicator light. A “beeper” sound function is selected by a mode switch for increased audibility in heart monitoring
Compact – (4" × 6" × 3 1⁄2"—1 1⁄2 lb.) facilitates placing the unit on an operating table or mounting to wall or to anesthesia machine with accessory brackets for unmatched convenience. Greater sensitivity – enabling use with chest piece cups at weaker signal sites, as well as with esophageal stethoscope tubes. Miniaturized sensor unit – suitable for direct connections to accessory sound sources with less clutter. Mode selector switch – for choosing best audibility characteristics for the type of monitoring desired. Pulselite – flashing red light indicator for visual heart/pulse monitoring. Metal case – seamless, deepdrawn, heavy aluminum case with carrying handle provides complete shielding from pick up of electrical interference from other equipment.

Mounting Kit (Mounts APM to a vertical rod up to 1" diameter or fastens to wall or cabinet)

Black Latex Breathing Bags, 1 Liter 7/8" Bush Neck closed tail oval pattern

Pediatirc 5/8" x 30" Ends, 15mm M x 15mm F

Pediatric 5/8" x 30" Ends, 22mm F x 15mm F

Adult 7/8" x 40" Ends 22mm F

Circuits & Components: Breathing Circuit ; Adult 7/8" x 40", Tubes and Y
7⁄8" I.D. × 40" length. 22mm end connections, “Y” piece fits mask directly or standard endo tube connector. Elbow not required unless 90° bend is desired

Circuits & Components: Breathing Circuit: Adult 7/8" x 40" Tubes, Y, Mask Elbow & 3 Liter Bag

Circuits & Components: Breathing Circuit: Pediatric 5/8" x 30' , Tubes, Y & Mask Elbow

Endotrachael Connecting Tube

PVC Plastic Cuffed Murphy w/valve & connector, 11mm

PVC Plastic Cuffed Murphy w/valve & connector, 12mm

PVC Plastic Cuffed Murphy w./alve & connector 13mm

PVC Plastic Cuffed Murphy w/valve & connector, 14mm

Clear PVC Uncuffed Murhphy & connector 2.0 and 2.5 mm

Clear PVC Cuffed Murphy w/valve & connector 3-10 mm 1/2 sizes

Large cat mask pliable vinyl, new

Diaphragm, replacement small
Transparent cone made from high impact plastic with neoprene rubber diaphram. 15 mm standard male taper connection fits "Y" or mask elbow directly.

Diaphragm, replacement for large and extra large
Transparent cone made from high impact plastic with neoprene rubber diaphram. 15 mm standard male taper connection fits "Y" or mask elbow directly.

Animal Mask Large, transparent cone w/rubber diaphragm
Transparent cone made from high impact plastic with neoprene rubber diaphram. 15 mm standard male taper connection fits "Y" or mask elbow directly.

Animal Mask Small, transparent cone w/rubber diaphragm,Transparent cone made from high impact plastic with neoprene rubber diaphram. 15 mm standard male taper connection fits "Y" or mask elbow directly.

Bickford Model 51110 Anesthesia Machine, New. 5 year warranty, Completely Assembled with Vaporizor 2 & 3 liter bag, ped & adult breathing circuit, savaging system
The BICKFORD Model 51110 is our most popular machine. A safe, easy to use anesthesia delivery system, it demonstrates outstanding performance design for today's veterinary professional. Design Features: ” Quick release toggle latches for easy to change absorbent (prepack or loose granules). ” Pressure manometer ” Air intake valve ” Pop off valve (see through, easy to clean). ” Horizontal inhalation and exhalation valves to prevent valves from sticking in the open position ” O2 flowmeter 0.2 L to 5 LPM. ” O2 flush ” Compact, very mobile ” Absorber pole allows absorber to adjust up or down and also swings out of the way when not in use. ” Stand provides excellent stability ” Quick & easy switch over from rebreathing to non rebreathing system. ALL STAND MODELS COME TO YOU: COMPLETELY ASSEMBLED - 5 YEAR WARRANTY* WITH 2 LITER BAG WITH 3 LITER BAG PEDIATRIC BREATHING CIRCUIT F/AIR KIT SCAVENGING SYSTEM *Note: 5 yr. warranty does not include rubber goods or plastic tubing. *Bickford Anesthesia Machines are warranted by A.M. Bickford, Inc. to be free from defects in parts or workmanship for a period of five years after delivery when used in normal service. Any Bickford Anesthesia Machine which proves defective in workmanship or parts will be repaired, replaced, or credited at the option of A.M. Bickford, Inc. during the warranty period at no cost provided the unit is returned to A.M. Bickford, Inc. and such defect if verified. A.M. Bickford, Inc. is not responsible for normal wear, damage from abuse, or misuse of the equipment or any obligation beyond repair or replacement of proven defects in the equipment SOLD WITHOUT VAPORIZOR; PRICED SEPARATELY

Non-Rebreathing System, PC-2A
Lightweight NRB mask elbow directly connected to a 1 liter 7⁄8" neck conductive rubber breathing bag, PC-2 valve, supply and discharge tubing, and connectors for vaporizer outlet. Assembled ready for use.

Non-Rebreathing System, PC-2B
Lightweight NRB mask elbow, 1 liter 7⁄8" neck conductive rubber breathing bag with attached discharge tube terminal, PC-2 valve, 6" × 5⁄8" diameter pediatric extension tube with 22mm male and 15mm female plastic ends, supply and discharge tubing, connectors for vaporizer outlet.

Non-Rebreathing System, PC-2C
Lightweight NRB mask elbow, 1⁄2 liter conductive rubber breathing bag with plastic adapter to 22mm female, discharge tube terminal, PC-2 valve, 6" × 5⁄8" diameter pediatric extension tube with 22mm male and 15mm female plastic ends, supply and discharge tubing, connectors for vaporizer outlet.

Pressure Regulators & Accessories: Oxygen, Large Cylinder w/HP Gauge, Male DISS Outlet

and Accessories: Nitrous Oxide, Large Cylinder w/HP Gauge, Male DISS Outlet
Pressure Regulators for Large Cylinders ” High quality chrome plated forged brass construction. ” D.I.S.S. Outlet. ” Safety Relief Valve. ” Pre-set 50 P.S.I. Outlet Pressure. ” Porous Metal Inlet Filter. ” 0-4000 P.S.I. High Pressure Gauge for Cylinder Contents 799822 Oxygen 799823 Nitrous Oxide

and Accessories: Regulator w/HP Gauge, 0-15 L/M Flowmeter and Cyl. Yoke (Oxygen)

and Accessories: Regulator w/HP Gauge, 0-8 L/M Flow Gauge, connects to small cyls. (Oxygen)
72002 Pressure Regulator with high pressure gauge, 0-8 liter per minute flowgauge, flow control valve, CGA870 yoke connects to small O2medical cylinders.

and Accessories: O2 Regulator/Flow Gauge/ Swivel Yoke
72003 Swivel Yoke D.I.S.S. Outlet 50 PSI Preset Outlet pressure. D and E size small cylinder.

and Accessories: Regulator w/HP Gauge, 0-8 L/M Flow Gauge, connects to large cyls. (Oxygen)
72011 Pressure Regulator with high pressure gauge, 0-8 liter per minute flowgauge, and flow control valve, connects to large oxygen cylinders with CGA540 connector

O2 Flowmeter Standard with hand twist female D.I.S.S. inlet 60035 0-8 LPM 60036 0-15 LPM Ohio QC adapter for inlet of flowmeter available

O2 Flowmeter Standard with hand twist female D.I.S.S. inlet 60035 0-8 LPM 60036 0-15 LPM Ohio QC adapter for inlet of flowmeter available

Vapomatic Vaporizer for Halothane
Vapomatic™ is a top quality, superior performing, agent specific calibrated anesthetic vaporizer which will adapt to most anesthesia machines. Vapomatic™ is at this time the newest vaporizer on the market and the only such vaporizer currently made in North America. Vapomatic™ is produced with the experience of over 35 years of vaporizer design, testing, manufacturing and servicing of all makes and types of vaporizers and anesthetic equipment. Vapomatic™ is designed to provide outstanding performance at the low flow rates commonly used for veterinary anesthesia. Features Temperature compensated. Output concentration stable during assisted respiration pressure pulses. Filler-drain-contents window combined in easy access single unit. Large dial with easy to see numbers has “off” lock and calibration indents. Dial Rotation: CW to decrease and “off” CCW for “on” and increase. “Off” Position locks to prevent accidental actuation of vaporizer. When “Off”, vaporizing chamber is isolated and gas is bypassed to outlet. Tamperproof adjustments – dial seal must be broken for access. Sump may be removed for cleaning or wick replacement without disturbing calibration by removing one screw. Inlet and Outlet fittings are standard 23mm male & female tapers and are individually replaceable. Other connector options are available upon request. Mounting holes in rear are interchangeable with other vaporizers. Vapomatic™ Performance & Specifications Range of gas flow rates: 0.1 to 10 liters/minute. Range of ambient temperatures: 60°F to 90°F. Range of anesthetic concentration: 0.5% vol. Models available for Isoflurane or Sevoflurane. Calibration accuracy: ±.1% concentration or ±10% of dial setting at calibration points. Liquid capacity (dry): Approximately 200 ml. Weight (dry): Approximately 7.5 lb.

Vapomatic Vaporizer for Isoflurane
Vapomatic™ is a top quality, superior performing, agent specific calibrated anesthetic vaporizer which will adapt to most anesthesia machines. Vapomatic™ is at this time the newest vaporizer on the market and the only such vaporizer currently made in North America. Vapomatic™ is produced with the experience of over 35 years of vaporizer design, testing, manufacturing and servicing of all makes and types of vaporizers and anesthetic equipment. Vapomatic™ is designed to provide outstanding performance at the low flow rates commonly used for veterinary anesthesia. Features Temperature compensated. Output concentration stable during assisted respiration pressure pulses. Filler-drain-contents window combined in easy access single unit. Large dial with easy to see numbers has “off” lock and calibration indents. Dial Rotation: CW to decrease and “off” CCW for “on” and increase. “Off” Position locks to prevent accidental actuation of vaporizer. When “Off”, vaporizing chamber is isolated and gas is bypassed to outlet. Tamperproof adjustments – dial seal must be broken for access. Sump may be removed for cleaning or wick replacement without disturbing calibration by removing one screw. Inlet and Outlet fittings are standard 23mm male & female tapers and are individually replaceable. Other connector options are available upon request. Mounting holes in rear are interchangeable with other vaporizers. Vapomatic™ Performance & Specifications Range of gas flow rates: 0.1 to 10 liters/minute. Range of ambient temperatures: 60°F to 90°F. Range of anesthetic concentration: 0.5% vol. Models available for Isoflurane or Sevoflurane. Calibration accuracy: ±.1% concentration or ±10% of dial setting at calibration points. Liquid capacity (dry): Approximately 200 ml. Weight (dry): Approximately 7.5 lb.

Vapomatic Vaporizer for Sevoflurane
Vapomatic™ is a top quality, superior performing, agent specific calibrated anesthetic vaporizer which will adapt to most anesthesia machines. Vapomatic™ is at this time the newest vaporizer on the market and the only such vaporizer currently made in North America. Vapomatic™ is produced with the experience of over 35 years of vaporizer design, testing, manufacturing and servicing of all makes and types of vaporizers and anesthetic equipment. Vapomatic™ is designed to provide outstanding performance at the low flow rates commonly used for veterinary anesthesia. Features Temperature compensated. Output concentration stable during assisted respiration pressure pulses. Filler-drain-contents window combined in easy access single unit. Large dial with easy to see numbers has “off” lock and calibration indents. Dial Rotation: CW to decrease and “off” CCW for “on” and increase. “Off” Position locks to prevent accidental actuation of vaporizer. When “Off”, vaporizing chamber is isolated and gas is bypassed to outlet. Tamperproof adjustments – dial seal must be broken for access. Sump may be removed for cleaning or wick replacement without disturbing calibration by removing one screw. Inlet and Outlet fittings are standard 23mm male & female tapers and are individually replaceable. Other connector options are available upon request. Mounting holes in rear are interchangeable with other vaporizers. Vapomatic™ Performance & Specifications Range of gas flow rates: 0.1 to 10 liters/minute. Range of ambient temperatures: 60°F to 90°F. Range of anesthetic concentration: 0.5% vol. Models available for Isoflurane or Sevoflurane. Calibration accuracy: ±.1% concentration or ±10% of dial setting at calibration points. Liquid capacity (dry): Approximately 200 ml. Weight (dry): Approximately 7.5 lb.

High-quality, low-noise aerosol compressor with user-friendly design. Compact design with rounded corners, integrated carrying handle with storage compartment and built-in nebulizer holder. Piston-driven motor ensures high performance and long life. Complete with disposable nebulizer featuring 0.2 ml/min flow rate and 5 ml capacity medicine cup and cleaning/instruction manual. Designed to meet the requirements of HCPCS code: E0570. UL Listed Five year limited warranty. Each nebulizer comes with: 1 Disposable nebulizer (reusable single patient use) 1 Mouthpiece 1 PVC tubing 1 T adapter 1 Reservoir tube Technical Specifications Method Of Nebulization Piston Driven Power 120VAC, 60Hz Operating Temperature Range 50°F TO 104°F (10°C TO 40°C) Operating Humidity Range 10% to 90% RH non-condensing Storage Temperature Range -5°F TO 122°F (-15°C TO 50°C) Storage Humidity Range 10% to 90% RH non-condensing Weight 4.2 lb (1.91 kg) Width 6.8" Height 4.2" Length 11.7" Max Pressure (Compressor) 30 psi Flow Range (Compressor) 0 - 14 liters/min Particle Size (Nebulizer) 0.5 to 5 microns Capacity (Nebulizer) 5 ml

Mindray PM-60 Vet Pulse Oximeter, New with 2.4" Color Screen, High, Low Alarms both audible and visual.
Continuous monitoring as well as spot check.
3 Year Warranty
Price includes a lingual sensor. Add a rectal sensor by ordering our Nellcor Style Rectal Sensor.
Get a big bang for your buck. One of the only color screen hand held pulse oximeters on the market today!

Mindray PM-9000Vet Veterinary Monitor Standard Configuration.
ECG,Respiration,SPO2 & Temperature. 10.4" Color Screen, Net Interface .
New with 3 Year Warranty.
The Cadallac of the EKG monitor on the market today.
,b>Compare the screen size, the accessories included and of course the price!
No body does it better!!

New Mindray PM 50 Vet Pulse Oximeter. Includes Lingual Probe. Add Rectal Probe for $85.00 add part number DIA-MEDRECTALPROBE to you order.
A low cost, high quaility pulse oximeter.
This is strickly a monitor. No high or low alarm with this economy unit.
Great for dentals or surgical procedures.
Operates from batteries so you can take it in the field and not worry about your $1,000 pulse oximeter getting damaged or lost.

New Schuco-Vac 330 Aspirator controlled vacuum regulation from 0" to 22" Hg with a flow rate of 28 lpm. New design with regulator protected for long life.